A Quality Assurance inspector failed to sign onto a Lock-Out/Tag-Out before entering a maintenance work area. Upon arriving at the work location, the inspector obtained the work order, and without reviewing, turned directly to the attached weld data sheet and proceeded to perform the inspection. The inspector made several entries into the work area over the shift before realizing they needed to be on a Lock-Out/Tag-Out for the work evolution. Upon realizing the error, the inspector immediately exited the work area and report the violation.
You are accessing a U.S. Government information system.
Unauthorized or improper use or access of this system may result in disciplinary action, as well as civil and criminal penalties.
By using this information system, you understand and consent to the following:
You have no reasonable expectation of privacy when you use this information system; this includes any communications or data transiting,
stored on or traveling to or from this information system. At any time, and for any lawful government purpose, the government may monitor,
intercept, search and seize any communication or data transiting, stored on or traveling to or from this information system.
The government may disclose or use any communications or data transiting, stored on or traveling to or from this information system for any lawful government purpose.
Classified or Official Use Only information is not allowed on this website.
Need help? Contact the System Administrator 509-376-4821 or
firstname.lastname@example.org. Their hours of operation are 6 AM to 4 PM PT Monday through Thursday.