Cathodic Protection System drawings were not included in the evaluation and approval of an excavation/penetration permit. While augering the last hole location for concrete piers, operations personnel noticed a wire and caution sheeting on the auger bit. Lesson Learned: When developing an Excavation Penetration Permit ensure that all associated components of the mechanical and electrical structures identified in the permit are included to ensure damage does not occur during excavating activities.
You are accessing a U.S. Government information system.
Unauthorized or improper use or access of this system may result in disciplinary action, as well as civil and criminal penalties.
By using this information system, you understand and consent to the following:
You have no reasonable expectation of privacy when you use this information system; this includes any communications or data transiting,
stored on or traveling to or from this information system. At any time, and for any lawful government purpose, the government may monitor,
intercept, search and seize any communication or data transiting, stored on or traveling to or from this information system.
The government may disclose or use any communications or data transiting, stored on or traveling to or from this information system for any lawful government purpose.
Classified or Official Use Only information is not allowed on this website.
Need help? Contact the System Administrator 509-376-4821 or
firstname.lastname@example.org. Their hours of operation are 6 AM to 4 PM PT Monday through Thursday.