EFCOG Best Practice 150 - Plan of the Day Leads to an Effective Pre-Job Brief
2805 Views
Feedback
0 Comments

Favorite
Image for EFCOG Best Practice 150 - Plan of the Day Leads to an Effective Pre-Job Brief

Type:  Best Practice

Publisher:  B&W Pantex, Amarillo, TX

Date: 

Topics:  Work Management/Planning

The Plan of the Day (POD) is a document that is used in Maintenance to highlight Safety, Security, & Quality information that leads into the job specific pre-job briefing. The POD provides a structured, risk-based review of work activities from a human performance perspective and enhances the workers situation awareness while in the field.

This best practice is based on INPOs Human Performance Tools for Workers (INPO 06-002). The POD is performed in the Work Planning phase in preparation for the Pre-job Briefing. The POD is developed daily and sent to all Maintenance Managers so that they may brief their employees on the topics.

Click on the attachment to view the article.
Note: You must be logged in to view the attachment.

You must be logged in to open the attachment.

Download Article
Did you find this article helpful?

Favorite
Comments about this Article
You must be logged in to add or view comments.
Related Articles

Benefits of Integrating Fabricator in Design Process

Process Gas Release During Deactivation Work Activities

Questioning Attitude Stops Work Activity With Less than Adequate Work Control

Subcontractor Removing Shrubbery for Building Decommissioning Damages Lights, Exposing Wiring

Backhoe Window Broken while Attempting to Remove Buried Conduit

DOE Operating Experience - Contact with Underground Utility Lines

Ground Prong Failure Causes Stray Voltage - Tingling Sensation (Shock)

Know the Scope of Work: Non-DOE Owned Radiation Generating Device Transported on Site Violated Requirements

Awareness of Potential Interactions with Co-located Mechanical Equipment

Inadequate Material Specification Leads to an Uncontrolled Electrical Hazard

Salt Waste Processing Facility Construction Work Package Closure

Guard Against Making Assumptions Related to Location of Underground Assets

5000 Pound Cryostat Lid Falls from Stand

Mine Fatality - Metal Beam Falls on Worker

Failure to Implement Compensatory Measures Allows for Recurring Issues

Groupthink Resulted in Bypassing Work Control System

Anatomy of an Incident and Lessons Learned: Arc Flash Accident at LANL

Adding Sulfur to a Mercury Process Line and Getting an Unexpected Outcome

A Healthy Respect for What Can Go Wrong: PNNL Research Boat Crew Stops Work in Poor Conditions

Maintain Control of Work: Programmatic and Human Performance Weaknesses Contribute to Clothing Contamination

Lessons learned from W-130 Project Radiological Planning

Broken Hand - Ergonomic Limitations Introduce Unmitigated Hazards

Employee Falls Into Cooling Tower Basin when Basin Grating Support Fails

Breach In Confinement Area Due To Leaking Pipe

Work Order Acceptance Criteria

Peer to Peer Accountability - Valve Turning

Custodian Cuts Hand Cleaning Blind Reach Area

Planning to Address Upset Conditions Prepared Work Team to Rescue Workers from Aerial Lift

Operator Fractured Cheekbone Performing Routine Operational Check

Disassembly of Low Energy Energized Components

Foot Fracture while Assisting with Crane Lift

Consider Degraded Equipment from Fire Events during Pre-Planning Hazard Analysis

Undetected Electrical Circuit Hidden in Wooden Storage Box

Moving HVAC Parts Pose Amputation Risk

Small Fire Ignites in Aerosol Generator during HEPA Filter Testing in RPL

Lessons Learned from Launch of New ES&H Orientation Training

Pre-Job Thermal Stress Evaluation and Work Control Practices Can Minimize Potential for Radiological Contamination

Unanticipated Alpha Levels in Sample Bag

OPEX Quarterly Issue 1 November 2016

Shock Incident at the ARC1 Box Power Supply in the LERF Building

Feedback Form
How did you apply this information?
You must be logged in to use this feature
Is this article applicable to your organization?